Qubino Z-Wave Plus Dimmer 0-10V
The absolute best selling Qubino Z-Wave Dimmer 0-10V is a unique. This Z-Wave product which was developed to provide for the needs of Smart Home users looking for a Z-Wave solution that controls devices such as lights, fans and similar products with 0-10V signal. The GOAP Flush Dimmer 0-10V is ideal for remotely dimming LED lights with low voltage ballast.
Qubino modules are “install-and-forget” products. Qubino are made to last, so we only select and use top-quality electronic components. These modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.
- The Qubino Z-Wave Dimmer 0-10V occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box
- Standard 0-10V output
- Multi-function input in connection with: push button / switch / potentiometer / input 0-10V (any sensor with 0-10V output)
- Perfect for dimming lights with ballast 0-10V
- Controlling fan speed (for motors or frequency inverters with 0-10V speed control input)
- Controlling heating / cooling valves (with 0-10V input)
- Unlimited controlling capability through gateway
- Z-Wave Plus compliant
- 23 additional parameters for expert users
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Please note: If you are installing the entire Z-Wave™ system for the first time, please refer to the installation guide of your Z-Wave gateway before installing this device.
The Qubino Flush Dimmer uses a unique MOSFET 'trailing edge' dimmer to enable it to work with a huge range of bulb types:
Halogen and Incandescent (230V)
Dimmable LEDs (230V)
Dimmable CFL and Fluorescent (230V)
Low Voltage Halogen (24V)
Low Voltage LED (24V)
The Qubino Z-Wave Dimmer can be used in the 230V mains lighting system where it uses a 'Trailing Edge' style dimmer to control the lights. It can also be used in a 24V low-voltage system where it uses PWM style control of the bulbs.
RF Protocol: Z-Wave Plus ™, SDK version: 6.51.03
RF Frequency: 921.42Mhz - AU/NZ approved RF for Z-wave
Application: Indoor use only
Power: 12-24 VDC
Operation Range: Up to 50m indoors with no obstacles
Compliance: EN 60669-2-1
Operating Temp.: -10C ~ +50C
Max. control voltage ratings: -20/+20VDC
Control signal range: 0-11VDC
Max. sinking current: 2 mA
Max. sourcing current: 10 mA
Dimensions: 41.8 mm x 36.8 mm x 15.4 mm
Note: Previous product name GOAP Z-Wave Plus Dimmer 0-10V
Nimbull Smart Home is an authorised distributor of this product. We guarantee that this product is authorised Australian stock and comes with a manufacturer warranty.