Smart Home Store & Showroom | 30 Day Returns | Buy Now Pay Later - ZipPay
GOAP Z-Wave DC Tub Motor Ctrl

Qubino Z-Wave Shutter DC

Regular price $99.00 Sale

Quick Overview

The Qubino Z-Wave Shutter DC is the world's smallest Z-Wave module able to control 12-24V DC motors of blinds, rollers, shades and Venetian blinds.

Z-Wave Plus certified
Supports the connection of a temperature sensor
Can measure the power consumption of connected device

Product Details

The Qubino Z-Wave Shutter DC is a Z-Wave Plus (500 series) controller for blind, roller and shade motors with 12-24V DC motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.

The Qubino Z-Wave Shutter  DC allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.

This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;

Vera Edge/Plus
Fibaro Home Center 2/Lite
Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Technical Specifications:

RF Protocol: Z-Wave Plus (500 series chip)
RF Frequency: 921.42Mhz - AU/NZ approved RF for Z-wave
Z-Wave device type: Z-Wave binary switch, routing slave
Power: 12-24V DC ± 10%
Rated Load Current: 2A
Overcurrent Protection: 5A
Output circuit power of DC output (resistive load): 48W (24V DC)
Operation Range: Up to 30m indoors (with no obstacles)
Application: Indoor use only
Operation temperature: 10 ~ 40 °C
Storage temperature: -10 ~ 60 °C
Weight: 30g
Dimensions: 41.8mm x 36.8mm x 16.9mm

Note: Previous product name GOAP Z-Wave Plus Tubular Motor Controller

Nimbull Smart Home is an authorised distributor of this product. We guarantee that this product is authorised Australian stock and comes with a manufacturer warranty.