Qubino Z-Wave Shutter
The Qubino Z-Wave Tubular Motor Controller is the world's smallest Z-Wave module able to control the motors of blinds, rollers, shades and Venetian blinds.
- Z-Wave Plus certified
- Supports the connection of a temperature sensor
- Requires 3-wire (including neutral) installation
- Can measure the power consumption of connected device
The Qubino Z-Wave Tubular Motor Controller is a Z-Wave Plus (500 series) controller for blind, roller and shade motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.
The Qubino Z-Wave Tubular Motor Controller allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
RF Protocol: Z-Wave Plus (500 series chip)
RF Frequency: 921.42Mhz - AU/NZ approved RF for Z-wave
Z-Wave device type: Z-Wave binary switch, routing slave Power: 230 VAC ± 10% Load: 2 x 920W (4A resistive @ 230V AC)
Power Consumption: < 0.7W Operation Range: Up to 30m indoors (with no obstacles)
Application: Indoor use only
Operation temperature: 10 ~ 40 °C Storage temperature: -10 ~ 60°C
Dimensions: 41.8mm x 36.8mm x 16.9mm
Note: Previous product name GOAP Z-Wave Plus Tubular Motor Controller
Nimbull Smart Home is an authorised distributor of this product. We guarantee that this product is authorised Australian stock and comes with a manufacturer warranty.